Feb 20, 2.
Aug 25, This is the quickest easiest way to remove upper control arm bushing Only tools needed are a hammer, flat chisel, piece of pipe, piece of wood. Aug 16, Manual Removal Method This is the hardest method of removing control arm bushings there is, but it is also the one that gets used the most by non-professionals.
Mar 10, 1.
Basically, you place the arm in a vise or just hold on the ground and you beat the control arm bushing with a hammer. It doesn’t work well and can easily damage the arm itself. Part 5: Suspension & Control Arm Install (Final Step)stumpcutter.bar?v=5binCHs8kL0Part 4: Front Control Arm Bushing.
Mar 12, If you have a shop press, you can push the shaft and force out one bushing than then slip out the shaft before pushing out the opposite side. Another common way is with an pneumatic hammer / chisel to push out the bushing from the flange and then slide out the shaft, then pushing out the opposite bushing.
69 chevelle. bushings. Feb 28, Loosen and remove the nut from the ball joint on the upper control arm (UCA). Next, using the jack, slowly lower the LCA until the the UCA separates and is free of the ball joint.
Continue to lower the jack until a point where the spring no longer has any tension and is fully stumpcutter.barted Reading Time: 8 mins. Feb 20, Feb 20, In my experience I have learned to take them to a machine shop, let them press the old bushings out and press the new ones in. I screwed up a upper control arm once trying to drive them out with a air hammer. Feb 20, #3.